Final Project
This is a project that I'm extremely excited about. As a part of my overall project to build a partnership media company I'm building a booklet that can be reproduced and giving out at different trade shows or to the general public as a way to show what AntlerShed Media is about.

I've decided to do what I call is double open booklet, that will be spiral bound on both sides the cover, first, and second pages will all be cut down the center so that they can open up like doors. As far as my thumbs go to be honest I knew exactly the route that I wanted to run with this project so the only picture I have to post is my rough.

Apart from the way that the booklet is bound, the overall spread will be and 8 1/2 x 11 page size in landscape layout with 1/4" margins and 1/8" bleeds. The cover will incorporate a picture simulating shed doors. On the left door as you look at the booklet my logo will be presented, and on the bottom right side will be a quote that I'm still determining. Also the doors will have simulated antler door handles. Once you open the doors the first page will be information on Devin's photography and videography background. The right side will be a collage of the work that he has put together which will be be continued onto the back of the page. The second page that will open will be the same design only my own biography and background for design and video editing will be on the opposite side. Again my portfolio for my designs that I've done will be portrayed opposite of my photo and biography. The back page of my booklet will incorporate some information about the services we offer, the logo again and contact information. The back of the booklet will be a photograph of the back of the shed, giving the AntlerShed emphasis.

Here are the roughs for the pages

After going being able to get through the rough draft stages I couldn't wait to setup my brochure. After careful collaboration I decided that the final project would be half of the original 8.5 x 11 size. So the final size of my print came out to be 4.25 x 5.5. Now again after having the final file in my hands I again decided that I need it to be a little larger. My original idea for these brochures would be to hand them out at trade shows, seminars, etc. so that I could have a high quality product that would set AntlerShed Media a step above the rest. Now also my original idea to place poster board on the back of the brochure to give it the thickness desired changed again after careful consideration of paper weight. I was able to find a thick enough coated paper that made my product pop off the page and still stand up with being to flimsy to support the double coiled binding on each side. So after finding this out my final files also needed to be changed so that I could incorporate a back page to the file. All and all I'm very satisfied with the product that we are putting out, now from being a handout brochure because I found out it would cost me around $800 to have 1000 printed which at the time being doesn't meet the company budget. So now I will enlarge the file and make it a brochure that possible customers can pick up and look at to see what kind of products that we offer. Just like every one of the items that I've created this semester this will be a huge aid to my future business endeavors.

Here are my final images:

Billboard/Magazine

Just to begin with this project was tough because my mind had seen so many magazine and billboard ads that I wanted to copy, so many designs that I preferred, but ultimately decided to go with a bit of my own flavor. This campaign is to introduce the new AntlerShed Outdoors Spring DVD.
 So after researching what magazine that I would like to advertise with I decided Traditional Bowhunter Magazine was the way to go. Given that my target audience is people within the outdoor community and that I am an avid reader of this magazine this was my choice.

To begin I had to go out and find the ad specifications for this magazine, which to my surprise was relatively easy to get a hold of. Within there website they had the PDF file for all the ad specs.

So being that I was able to build a full page ad, my specs were 7.25x 9.25 with a .25 inch bleed.
Now knowing in my mind that the majority of the layout would also be used for my billboard ad also I really wanted to keep this spread simple and to the point. Here are my thumbs for the magazine.

I decided to go with (as you look at it) the bottom left layout.
Here is the rough.

Very simple and to the point. The title as you look at the page will be 8.25 x 1.75 inch title that will read "AntlerShed Outdoors". The fonts for the page will be chosen later. Under the title will be a subtitle, "presents", this will be measured at 2.75 x 1.5 inches. The main content of the page will be a newly drawn Turkey Logo that I have created, it's measurements are 6.25 x 4.25. At the bottom of the page will be the main type, "SPRING v. 1" measuring 8.25 x 3 inches.
The background of the entire layout will be a wood grain simulating the ad to look like a barn wall. All the logos and type will try and simulate possibly a wood burned look (I haven't decided totally on that yet).

Now following the same theme of this magazine spread for my billboard I flipped it to a horizontal plane.
Here are my thumbs for the billboard.

As you look at the page again I went with the far left layout.
Here is my rough.

As you can tell here it's similar to my magazine spread with the addition of the website address which will fall next to the turkey logo. As i looked at examples of billboards on the road I will need to make sure that my type is very visible, especially the website. The reason for this is getting my target audience to the website will in turn hopefully sell our products.

Although both of these are very rough drafts and all you can really pick away from them is the overall layout, my designing really hits me as I actually put the content into the layout.

My purpose for choosing this magazine is that alot of my design ideas are geared toward the outdoors, being an avid outdoorsmen myself my mind thinks in that mindset so these designs are what fills my head. So as in my purpose my target audience for this is to show anyone who reads this magazine our new DVD entitled Spring, in efforts to one pick up sponsorship funds, and for two also establish a fan base. The call to action on the magazine ad is a couple things, either to visit our facebook, twitter, or you tube pages and to use our microsoft tag to send them directly to AntlerShed Media's facebook page to show them our work. Below are my billboard and magazine ads, the billboard target was to get the Spring name in there mind and to search it on facebook.

Newspaper Ad

Newspaper Ad
Easily one of the toughest assignments I've had to design yet is the Newspaper Ad. Though a very simple layout trying to really figure out what I wanted to portray in this ad is the tough part. Ulitmately again I decided to portray a photography ad (however this might change before critique day). After looking over good and bad examples today I'm going to keep this one simple, logo, bitmap, coupon, and contact icons. 
Here are my thumbnails: 













Altough these are very rough thumbnails I decided to use this time to really figure out my layout of how I wanted the ad to look.
After working with a $97 budget on this ad and using a system we learned today on how to figure up my ad size, I went with a 4 column spread, that was 6 inches high. Due to my logo size I felt this would best fit the content that I wanted, totaling out to be $96.

Here is my rough:













I went with the bmp image of the camera because it "hopefully" will draw attention to the add right off the bat with the next largest part of the ad being the coupon. My logo will be put next to my social media icons.
I'm really struggling if I want to make the entire ad a reverse also, but that will be determined later.

After struggling with how I wanted this ad to be portrayed, I decided to use this ad as a sort of a coupon to try and bring in some new customers. So the easiest way to do this is to attach a coupon the magazine ad, so I went with 25% off any work of your choice with the mention of the ad. So this is my final image of the design that I put together.

Chapters 8,9, & 10

CSR rule/ Talking with the Printer

Short for Customer Service Representative the CSR is the second person that you will normally be handed off to whenever your giving a job to the print company, the first being the salesman. One rule about CSR's is that you always want to make sure that they are knowledgeable at the print processes. In some cases your printing knowledge might supersede those of your CSR, in this case it is absolutely important that you handle this situation in a cor-gel manner. Asking to speak to someone directly on the print line about your job is not consider pestering them until you take it to that point. If you are able to speak directly with those handling your project on the print line then it is also imparitive that you keep your CSR in the loop. This will in turn improve your CSR's knowledge and make your job turn around in the future possibly easier.

 Planning for Print

Print planning is an essential process when it comes to a designer, and it is highly important that you know these steps to insure your job security, plus it will save you the embarrasement of the printers telling you to redo the job. Now let's learn these steps:

External Document Size: Whenever creating a piece whether it be a one page poster or a tri-fold brochure, knowing your final document size is crucial. This can be done either from your clients specifications or from an example that you already have, if you already have the example then get a ruler and make certain the final size.

Adequate Bleed: Most projects are set bleed is 1/8th of an inch, you should be fine to set your bleed at this. However speak to your printer to ensure that they do not require any larger.

Internal Panel Sizes: If your setting up a job that folds, make sure that you incorporate those folds in your document. One easy way to do this is to establish guidelines in your layout program, also you can speak with you print service to see if they provide a template.

Artwork Interactions with folds, perforations, or die cut trims: It is important to speak with your print provider on your folding jobs to ensure that any artwork that is placed up against a fold line does not bleed over. Speak with your print company so that they can ensure that this doesn't happen by giving you guides or bleed lines that you should establish in your document.

Correct Number of Pages: In all multi page documents the number of pages should be divisible by four. An example used in the book is, "pull out the pages in a book, look at the loose pages remaining and you will notice that they are fours, two front and two back." If you are putting together a notebook or something of the sort then you can get away with an odd number by using the blank pages as a place to write notes.

Correct Inks: Delete all unecessary colors that are in your swatches panel. This helps the printer in establishing which colors in your job are used.

Checking Raster Images

Making sure that your images are named correctly, colored correctly, and are the correct resolution is imperative so that your design comes out correct and that there are no hiccups in the printing process.

Resolution: When using a raster image normally it needs to be set to 300 ppi at it's final image size however there are exceptions. In large format printing your customers will probably be several feet away from your final design so with a lower ppi setting you will achieve the same result as if they were looking at a small document up close. So on your large format prints most the time you should be able to get away with a 150 ppi.

Color Space: In most print shops you will want your final file to be colored in CMYK, however again in a color managed print shop you may be allowed to use RGB. In your grayscale projects then make sure that they are truly gray scale and are not just colored in gray in a CMYK format.

Retouching: If you have an image that needs retouching and you are not comfortable doing so then ask your print shop to provide this service for you. If you are going to ask this question however come prepared. Have your images that will need retouching printed before hand and explain to the printer what you are wanting to retouch on those images.

Rotations and Scaling: This is always to be done in the native software that the image was created in, example being photoshop, or illustrator. When you perform these rotations or scales in your layout software your image will most likely become pixelated and you will not receive your intended quality of that design.

Filenames: For easy use avoid useing any special characters in naming your files for the simple fact that whenever carried across platforms the file could not open correctly. Always instead of using a space use a _, and always try and keep your file names short for ease of recovery.

Vectors

Correct Colors: If you will be placing a colored illustration into your page layout software always use pantone colors. These can be located in Pantone books that will also ensure upon print that you will have the desired color you are looking for.

Images: If using an image in your vector art make sure that if you are planning to do any alternation or retouching to that image that you attach the image in your final file. Also always embed your images to ensure that image comes along to the final layout file.

Fonts: If possible try and do your typing in your layout file software, if you are bringing type into this software then make sure it is embedded. This will ensure that the final file has the correct look that you are trying to design. Also make sure that your layout file is packaged so that the fonts used are brought along.

Bleed: Set a bleed that is matching to your layout software in your illustration software so that if your vector art is going to bleed from your layout it you will know the precise size that it needs to be and it will be embedded into your layout without any pixelation.

Types of Proofs

A proof is a rough draft of what your final file will look like. Submit these as PDF's for ease at your local print shop. Most print shops will have the same software as what you are working on and can open the file however this is not a guarantee. Always do a final check of your project to ensure all of your vector and raster image checklists are correct, then export as a PDF with the correct file name. Whenever going to your print shop as them to print a proof and provide them with a high quality print PDF file.

Photoshop Elements

After finishing any editing that you might do within photoshop it is imparative that you flatten your file. This ensures that you are only bringing in one file to your layout software and not every layer you have from your photo. This will cut down on file size whenever exporting and packaging your file later.

If you are using a transparency on your final layout file make sure that this is done in your layout software. If you bring in a already opaque file then you will lose detail in your final file and this will give you no room to make changes later after seeing your printed proof.

AI artboards are what your working on within your Illustrator files, whenever you resize your illustration and place it into your layout software that board will come with it. It is always a good thing that you make your artboard a little larger than you 100% illustration to enable you to move the file if necessary within your layout software. Some people however like to scale there artboard down to that 100% illustration to ensure that your are not picking up any extra space.

Change is Everything: VDM

Getting AntlerShed Out

For the direct mail assignment it was really a struggle on how I wanted to assemble this piece. After looking at multiple examples I still hadn't got a set idea on what I wanted to go with. Of course the way it works with many design pieces after looking over my roughs it really hit me, I wanted to send people something that really portrayed our photography skill set. So I decided to go with a flip mail piece. The direct mail piece will be a 5x7 horizontal set that will fold open to tell people a little about our skill set with design and photography.

Here are my sketches:

After look over my sketches I realized that I really liked the layout of the second rough. The way I will portray this in a fold will be that I will be standing in the foreground in focus on the cover, and when you flip up the front cover my colleague and I will be reversed. Now this will be the version that new companies, and people trying to gain identity's for themselves through design will get. The other version will have Devin standing in the foreground and that version will be sent out to our photography customers seniors, family's, etc.

Although vague these are my roughs:

This is the front cover for the design customers

This will be the back of the front cover, or the top when you flip the card.

This will be the inside portion for our design customers

And finally this will be the back portion of the mailer

Keep in mind these are only my roughs so some things might change when it comes to the final piece but this keeps my ideas in line. Although vague this gives you a small idea on what I am going with when it comes to the direct mailer.

The Name of the Game is Change
You will notice that my roughs look nothing like my final draft. As I've come to learn within the design world change is the name of the game, things are never done until the customer is happy with the design. I went through an enormous amount of change with this project but ultimately ended up with a design that I love.
After really sitting back and taking a look at my rough I just didn't feel that the folding design would gain me anything more than a basic front back design. So my original target audience was going to be family and seniors. Mainly targeting the females within the house hold, because in my mind if you could win over those females you could gain the business. This was my ultimate plan going into on screen critiques.
These were the drafts that I made up going into critique day:

This was the second front cover that I designed:

After designing these in my eyes I loved this look, it went with my original mindset of targeting the female audience.

However, in business you gain an edge by doing something different. After critique day my eyes were opened on seperating myself from my competition and creating something away from the normal. From my previous blog my logo has an edge to it, more leaning towards a male appeal so after direction from my colleagues I decided to CHANGE.

I went from trying to target the female audience I decided to switch my target audience to target the male and female crowd. So with this in mind I really did struggle on the way I wanted to portray this mailer. I knew for a fact that I really wanted to emphasize our photography skills with this mailer, trying to gain those family portrait and senior clients.

After completely redoing the design process I came up with my final mailers.

As a courtesy I want to apologize the tough reading on the ladder half of the 6/7 blog, I'm not really sure what happened but I've tried to fix the problem and there is nothing that I can do to change the way the white is highlighting the text, so again I apologize.

Chapter 6/7 Summary

PostScript

PostScript fonts consist of two files: A bitmap "screen font" component for onscreen display and a printer component that contains PostScript instructions for actually printing the character. One of the drawbacks to using PostScript is that since it is made of pixels it can't provide acceptable resolution for output. Also if you do not have the PostScript font activated inside your operating system well your out of luck and your font will recall back to the screen default ultimately not giving you the designed feel of you work. (Print Production)

TrueType

 TrueType fonts were brought forth in a collaboration between Apple and Microsoft. Creation of the TrueType font was to have a font that did not need a file for screen and a separate file for print. However in the early days of TrueType the PostScript RIP's couldn't process the TrueType files correctly, so your finished product again wouldn't come out the way you had the design on screen. Now currently, the modern technology of the RIP's can process TrueType as well as PostScript.

OpenType

OpenType fonts are the best of both worlds. An OpenType font is a cross platform font, this means that there is no separate files needed for screen and print, nor is there different files needed to view on a Mac or a PC. Along with this font is the ability to add up to 65,000 glyphs, which in short means that anything that can be added along with a font, such as fractions, symbols, etc., comes along with an OpenType. This does not mean however that all OpenType fonts contain all of these things, it is up to the creator of the OpenType and what he or she adds.

Font Family

In Short a font family is an entire set of the font you choose, by entire set the family should include regular, Bold, and Italic. There are other variations of these three such as Bold Italic, or semi-bold but these three are the main differences in a font family. The actual definition of a font family that I have found is " a set of fonts all with the same typeface, but with different sizes, weights, and slants." (Webopedia) 

Glyphs

A Glyph is a distinct letter form. Also multiple Glyphs may exist for a single character position in an OpenType font. Example shown to the right. (http://i592.photobucket.com/albums/tt9/lehrusovsky/glyphs-example.png)

 dfonts

A dfont is easily put as a mac version of some of our most popular fonts. These fonts are essentially OpenType fonts that whenever opened on a Mac or PC they will show up as the font you've chose, but however the fonts for the two operating systems do have there slight differences. Now if us mac users want a cross platform jump with some of our default fonts then this can be done by using dedicated font-management software.

Multiple Master Fonts

Multiple Master Fonts are yet another printers nightmare. Created from a PostScript font, then allow the user to give this font multiple weights, angles, and widths. The problems this created wasn't that they were allowing a user to manipulate, the problem was that it wasn't obvious how to make all the cool variants, how to collect the variants necessary, or how to ensure that the print service provider knew how to use them. (Print Production) 

Licensing

In order to protect those font constructors out there we have font licensing laws. Just like creating a song and having it taken from you without getting any credit for it, we need to a protection for those out there taking the time and consideration that goes into creating a font. One of the most popular agreements is a EULA (End User License Agreement). This is the agreement that a lot of us have probably agreed to and not even read it. Most of the fonts able to be nabbed are free for personal use but will have problems whenever it comes down to you and the printer. (Print Production) 

File Naming 

Now that file naming has become a little more forgiving than it used to be, there is one common consensus when it comes to file naming, keep it brief. Between platforms there are limitations as far as characters are concerned and that is an allowance of total characters, so to be safe whenever nameing your files, two things, keep it brief and avoid punctuation. If you follow those two rules then you should have happy days with your file names and you and the printers will get along great.

Extensions 

In the olden days, a file extension for mac users was unrequired. Files then consisted of two forks, a data fork and a resource fork. Pretty much self explanatory on what each side held, the data fork held all the "guts" and the resource told the system which icon to use. Although still you manually adding a file extension by type isn't necessary, you do have to specify so that opening files cross platforms is still possible.

Cross Platform Formats

Cross Platform Formats is exactly what the name says, formats that can cross platforms without any special software required to open them. Some of these formats are things such as JPEG's are saved with the extension .jpg and both Macs and PC's can read this file format the same and open this image that is present. 

Sources

http://www.webopedia.com/TERM/F/font_family.html
"Print Production" Textbook